Comar Condensatori QSR6 Bedienungshandbuch Seite 35

4 Functions
4.1 Powering on
When power is switched on, an internal
self test routine has been performed.
The display shows the installed s/w
release.
Power Factor Regulator
SELF TEST - v1.9
4" Setup
After start-up process, the regulator is
working in "Automatic" operation.
P.F. Value
"+" P.F. Lag
"-" P.F. Lead
Banks
+0,93 PF/
disconnection
CAP 123---
Output
ON
4.2 Key function
The key enable change from
"Automatic" to "Manual" (light is on).
When pressed for 4 seconds it
enable to enter the set-up page and
confirm setting
Keys used in "Manual"
enable switch-on and off the output.
Used in "SET-UP" enable setting of
the value.
U s e d i n " A u t o m a t i c " e n a b l e
visualization and reset of "Alarm
memory".
32
Spinning when
working
Banks
connenction
IND
Output
OFF