Comar Condensatori QSR6 Bedienungshandbuch Seite 25

1 Instruction
1.1 Introduction
Before connecting the regulator to the mains, read the instructions in this
handbook, they provide important indications about the safety, use and
maintenance. Take carefully this handbook for any information.
This regulator has been manufactured and tested in accordance with
international standard, it leaves the factory in perfect safety conditions. In
order to mantain these condition and to ensure safe operation, the user must
comply with the instructions and remarks given in this manual. After removing
the packaging check that the regulator has not been damaged during transport.
In case of doubt, do not attempt to fix or use the regulator. If the equipment
has falled down or has been violently shaken during transport, it could suffer
internal damages which may be dangerous.
After checking that regulator cannot be safely used, it must be placed out of
order and not used before checking of experienced personnel. Causes that
bring to put the regulator out of order are the presence of external damages,
missed functioning, unproper stocking or transport conditions. Technical
Assistance on the regulator must be performed exclusively by COMAR
personnel.
22