Fan Mode - SOLIS VIVALDI 751 Bedienungsanleitung

FAN MODE

LOW SPEED MID SPEED
1
Press the [ I ] button turn on
power and turn the other switch
to the [ ].
HEATER MODE
COOL FAN
1
Press the [ I ] button turn on power
and turn the other switch to the
[ ].
When chose [AUTO] mode, the temperature will flash and a target temperature can be set by pressing [ + ] or
[ - ] -button, the target temperature can be from 10° C to 35° C. When the environment temperature lower
than the target temperature, the heater start to work.
Note: When the heating function is switched off, the fan keeps on working for approximately 30 seconds
until it switches off.
34
Solis_Vivaldi-Betriebsanleitung.indd 34
HIGH SPEED
2
5 sec
Press the [ ] power button,
the temperature and the current
time display for 5 seconds
alternately,[ ] low speed will
be activated.
LOW HEAT
2
5 sec
Press the [ ], power button
the temperature and the current
time display for 5 seconds
alternately, [ ] high heat will
be activated.
NATURE WIND
3
Press the «MODE» button can
set speed option: low  medium
 maximum  natural wind 
sleeping wind.
HIGH HEAT
3
Press the «Mode» button can
set heater option: Auto  cool
fan  low heat  high heat.
SLEEPING WIND
AUTO
flash for 5 seconds and
confirm selected
10.01.12 13:28