Requirements for the set-up location
For safe and trouble-free operation of the device, the set-up
location must fulfil the following requirements:
■
Place the device on a firm, flat and level surface .
■
Set up the device so that the speakers
■
Do not operate the device in a hot or very wet environment
or in the vicinity of combustible materials .
Operating components
(See fold-out page for illustrations)
LED lights
1
Speakers
2
Headphone socket
3
ON/OFF | VOL knob (On/Off and volume control)
4
Microphone socket
5
Operating LED
6
LED ON / OFF switch
7
Power supply cable with USB type A connector
8
Audio cable with 3 .5 mm headphone jack plug (green)
9
and 3 .5 mm microphone jack plug (red)
Cable adapter
0
(3 .5 mm Ø jack socket to stereo RCA plugs)
Operating instructions (symbol)
q
SPS 3 A1
(3 .5 mm Ø jack socket)
(3 .5 mm Ø jack socket)
are not covered .
2
GB │ IE
│
27
■