hajdu ZA15 Montage- Und Gebrauchsanleitung Seite 16

SUSPENDING THE STORAGE UNIT
Installation and connection of the hot water tank must be carried out by a qualified
technician in line with the provisions of MSZ HD 60364.
The hot water tank can be suspended using the 1 pc 160×40 wall hanger enclosed with
the appliance. Recommended mounting accessories: 2 pcs 6x45 hex head wood screws,
2 pcs washers and
2 pcs plastic dowels. These are not included with the appliance!
At the installation location, suitable electrical and water supply and sewage system
must be ensured, and before mounting, the structure of the wall must also be checked
by an architect for compliance.
Wall hanger
Figure 1
Fix the wall hanger (Figure 1), in such way that the wood screws should be driven in the
plastic dowels with the washers. Then, put the appliance onto the wall hanger as
shown in Figure 2.
15