Peaq PDR180BT-B Bedienungsanleitung Seite 15

DAB RADIO
When the radio is switched on for the first time, it will
automatically do a full scan of DAB/DAB+ stations.
The list of stations is then stored, eliminating the
need for another full scan when the radio is turned
on the next time.
When the scan is complete, the stations are stored
in alphabetical order. The first available station will
be played back.
Note
If there is no DAB reception at any time, change
the position of the unit or adjust the antenna. Press
Scan to start a new search.
Changing DAB/DAB+ stations
1. Turn the Tune dial to navigate available DAB/
DAB+ stations.
2. To confirm, press Select.
Storing DAB stations
Press and hold the button Menu in DAB mode until
"Full scan" appears on the display. Press Select
to confirm.
The unit scans all available DAB/DAB+ stations
and plays the first available station.
Note
New stations and services are added to the stored
DAB/DAB+ stations. In order to make new DAB/
DAB+ stations and services available on your ra-
dio, run a full scan at regular intervals.
Displaying station information
1. Select a DAB station.
2. During DAB/DAB+ radio playback, press Menu
repeatedly to display the following information
(if available):
• Radio station name
• Frequency
• Signal frequency error
• Audio state and bit rate
• Time
• Date
• Radio text
• Signal strength
• Programme type
IM_PDR180BT-B_190617_V05_HR.indb 15
Storing DAB stations
You can store up to 30 preset DAB/DAB+ stations.
1. Select the desired station.
2. Press and hold Preset until "Preset store" is
shown on display.
3. Turn the Tune dial to preset a number from
1 -30. Press Select to confirm the selection.
4. The preset number of the stored station is dis-
played.
5. Repeat steps 1 to 4 to store more DAB/DAB+
stations.
Selecting preset DAB stations
1. Press Mode to select DAB/DAB+ stations.
2. Press Preset to access the Preset menu.
3. Turn the Tune dial to select a preset number
and confirm your selection by pressing Select.
Using the DAB/DAB+ menus
In DAB mode press Menu until display shows [Full
scan] and use Tune to browse the menu options.
To confirm your selection press Select every time.
• [Full scan]
Searches for all available DAB/DAB+ stations.
• [Manual tune]
Manual tuning adjustment, for example align-
ing the antenna or adding stations.
• [Prune]
Removes all invalid stations from the station
list.
• [System]
System setting
FM RADIO
Selecting FM stations
1. Press Mode to select FM stations.
2. The radio plays the last station selected.
Selecting FM station frequencies
1. Select a FM station.
2. Manual frequency selection.
Turn the Tune dial to change the frequency at
intervals of 0.05 MHz.
3. Automatic frequency selection.
Press Select and the radio will stop searching
once an active station has been found.
ENGLISH
15
17/6/2019 18:46