Maintenance - Baumatic F60.2 Anleitung

in the position "0": the bulb is switched
off.
Shift the control
c)
III". The motor is running at "low,
medium, or high" speed. If you get the
control element in the position "0", you
switch the motor off
Touch control element
Start and increased speed (6 speeds)
The motor of the cooker hood is started by
pressing the button 1. At the activation, the
cooker hood is automatically set to the
Speed 1. You may increase the speed by
pressing the button 1 for the time shorter
than 1 second. The speed level is shown
on the screen.
If you press and hold the button 1 for the
time shorter than 1 second, you choose the
highest speed.
MODEL Width
F60.2 60 cm
F90.2 90 cm
BT6.3 60 cm
BT9.3 90 cm
BT16.3 60 cm
BT19.3 90 cm
in the positions "I, II,
.
Control
Button S1/ST1
Button S1/ST1
Button
Button
Button
Button
How to stop the motor and reduce the
speed
The operating speed of the ventilator may
be reduces by pressing the button 2 for the
time less than 1 seconds. The speed level
is shown on the screen.
If you press and hold the button 2 for more
than 1 second, you switch the cooker hood
off.
Timing function
The timing function allows programming the
motor and the lights of the cooker hood so
that they are automatically switched off
after 15 minutes from the activation of this
function. To do that, just press the button 3.
If the timing function is programmed, the
number will be flashing on the screen.
Light switch ON\OFF function
You can switch the light ON or OFF by
pressing the button 4.

MAINTENANCE

How to clean the carbon filter from
grease
The sieve of the filter is made of very thick
grid of stainless steel. Do not use corrosive
cleaning agents. If you keep the filter clean,
you provide proper function of the device.
Follow carefully the instructions below.
Type and
number of
filters
2
2
S1 2
S1 2
S1 2
S1 2
13
Number and Max
type of
lights m*m*m/h
2 Standard
2 Standard
2 Halogen
2 Halogen
2 Halogen
2 Halogen
500
500
500
500
500
500