AEG SSR 4888 TV Bedienungsanleitung Seite 65

Errors Cause
When connected to TV
No sound
set:
Audio cable is not
connected
Amplifier is not turned on
Wrong settings
Remote control Wrong direction
does not work
Range exceeded
Batteries exhausted
No DVD playback DVD is not finalized
DVD mode is not selected
Batteries exhausted
No DVB-T recep- The station is too weak for
tion reception via telescopic
antenna
No DVB-T reception in your
area
The station is too weak
Image looks like The station is too weak
mosaic
Bad radio reception The station is too weak for
stereo reception
Solution
Warning:
Turn the unit off before troubleshooting.
Please use an audio cable in addition to the
video cable "Connect audio cable".
Check if your amplifier is turned on in case an
audio amplifier is connected.
Check the DVD player settings.
The remote control is not pointed towards the
DVD player.
Ensure that the distance is no more than 5
meters from the unit.
Exchange the remote control's batteries
"Insert batteries into the remote control".
Use a finalized DVD.
Press the DVD/DVB-T button (Fig. 4/14) to select
DVD mode.
Exchange the batteries or use the mains power
cable.
Direct your antenna again or connect outdoor or
indoor antenna.
Direct your antenna again.
Direct your antenna again.
Set the BAND selector (Fig. 1/4) to mono (FM).
English
65