Connecting The Video Cable - AEG DVD 4539 HDMI Bedienungsanleitung

English
40

Connecting the Video cable

Fig. 2/14
Fig. 2/12
Fig. 2/11
05-DVD 4539 AEG_GB_new.indd 40 05-DVD 4539 AEG_GB_new.indd 40
Eff ective range of the remote control
If you want to use the remote control it has to be pointed at the remote
control sensor on the front of the device. The distance between remote
control and sensor should not exceed 5m. The angle of the remote con-
trol to the remote control sensor to right, left, top and bottom should
not exceed 30°.
The video cable transmits the video data from your DVD-Player to the TV
or the Video-Projector.
There are fi ve diff erent ways of connecting the DVD-Player with your
TV/Video-Projector. Select one of these possibilities to suit your replay
unit.
HINWEIS:
If you are not using a SCART or HDMI connection you must always
establish an additional audio connection for transmitting the audio
data (i.e. the sound).
SCART
SCART is used to transmit both Video and Audio data.
1. Plug the SCART jack fi rmly into the socket on the back of the player.
2. Plug the SCART jack into the corresponding socket on your playback
device.
3. Press the VIDEO button (Fig. 3/1) repeatedly to select the „RGB"
setting.
HDMI
Connection using a HDMI cable ensures a very high replay quality.
HDMI is used to transmit both Video and Audio data.
1. Plug the HDMI jack into the socket on the back of the player.
2. Plug the HDMI jack into the corresponding socket on your playback
device.
Select the „HD" setting by repeatedly pressing the VIDEO button
(Fig. 3/1) in stop mode.
Component Video
Connection using a Component Video cable ensures a very high replay
quality.
Component Video transmits only Video signals.
1. Plug each of the three jacks into the corresponding sockets on the
DVD-Player.
2. Plug the jacks into the corresponding socket on your playback
device.
You can select between the settings „P-Scan", „RGB", „S-Video" and
„YUV" for your connected playback device by repeatedly pressing
the VIDEO (Fig. 3/1) button in stop mode. Please see the operating
instructions of the connected device for the correct setting.
26.05.2009 9:22:43 Uhr 26.05.2009 9:22:43 Uhr