AEG DVD 4539 HDMI Bedienungsanleitung Seite 42

English
42
Fig. 2/17
Fig. 2/15
Inputs on the Front
Fig. 1/1
Fig. 1/6
Switching on the player
Fig. 1/2
05-DVD 4539 AEG_GB_new.indd 42 05-DVD 4539 AEG_GB_new.indd 42
Proceed as follows:
1. Plug the Audio jacks into the sockets on the back of the player. Make
sure that the jacks are correctly arranged:
- (1) Connection for Subwoofer: Bass
- (2) Connection for Center speaker
- (3) Speaker rear right
- (4) Speaker rear left
- (5) Speaker front right
- (6) Speaker front left
2. Plug the Audio jacks into the corresponding sockets on your play-
back device or your amplifi er.
Digital
Connect the Coaxial cable for transmission of digital Audio signals to
your playback device or your amplifi er.
1. Plug the Audio jack into the socket on the back of the player.
2. Plug the Audio jack into the corresponding socket on your playback
device or your amplifi er.
Optical
Connect an optical cable for transmitting the digital audio signal with
your playback device or amplifi er.
1. Insert the optical plug into the socket on the rear of the device.
2. Insert the optical plug into the corresponding socket of your play-
back device or amplifi er.
USB Input (on the Front)
Connect your output device directly to the socket on the front of the
device.
Memory Card Slot (on the Front)
Insert an SD/MMC or MS memory card into the card slot on the front of
the device.
Turn on the main switch of the DVD player by pressing the „ " on/off
switch on the front of the machine.
26.05.2009 9:22:44 Uhr 26.05.2009 9:22:44 Uhr