AEG DVD 4535 Bedienungsanleitung Seite 54

English
54
Ripping (CD-MP3 Conversion)
05-DVD 4535 N AEG_GB.indd 54
With an audio CD running you can activate the ripping function. This
function allows you to convert the data on the audio CD into the MP3
format and store on your connected MP3 player or inserted memory
card.

NOTE:
You can move through the ripping menu with the Cursor buttons (Fig.
3/30) and change the settings with the ENTER button (Fig. 3/7).
1. Press the RIPPING button (Fig. 3/13) to call up the ripping menu.
2. Perform the required adjustments under „OPTIONS".
Speed: Here you can select the speed with which the tracks are to be
converted. The options available are
1X = real time and 4X = Fast.
Bitrate: Here you can select the desired bit rate.
Create ID3 TAG: Select whether ID3 information should be created
( = Yes, = No).

NOTE:
This is only possible in the case of CDs which contain file informa-
tion.
Create Playlist: Select whether a PC playlist should be created
( = Yes, = No).
3. Under „TRACKS" you can now select the tracks to be converted with
the arrow buttons and the ENTER button (= selected).
4. Under „START" you are shown the number of selected tracks, the
total track length and the required disc space.

NOTE:

If you would like to convert all of the tracks on the CD, select
the box in the top line under „TRACKS".

In order to delete your selection, deactivate the box again.
5. Now select the „START" field press the ENTER button (Fig. 3/7).
6. The conversion begins. Progress is shown on the screen.
7. When conversion is completed the words „Ripping Complete" are
shown. Then press the ENTER button in order to return to the ripping
menu.
8. In order to exit the ripping menu, select the „QUIT" field and press
the ENTER button.

NOTE:

You can stop the conversion process by pressing „Cancel". Press
the ENTER button to do so. The tracks already converted are
nevertheless stored.

Interrupted tracks and those already present can only be
deleted on the PC.
17.07.2009 12:59:31 Uhr