AEG DVD 4535 Bedienungsanleitung Seite 52

English
52
Using a USB medium
Selecting file/directory
and starting replay
05-DVD 4535 N AEG_GB.indd 52

NOTE:

In order to find out which files can be played back the DVD
player now reads the contents of the storage medium. In the
case of large storage media this procedure may take a long
time.
4 . Select the desired file(s) und start playback ➯ Page 52, „Selecting
file/directory and starting playback".
5 . If you would like to change back to DVD mode, press the USB button
(Fig. 3/9) again.
Use the Cursor Buttons (Fig. 3/ 0) to select
„DISC" mode. Confirm with the ENTER (Fig. 3/ button.
By means of the USB connection you can connect numerous devices
to the DVD Player.
This device has been developed in accordance with the latest technical
developments in the USB field. Unfortunately the large number of dif-
ferent types of USB storage media on offer today makes it impossible to
guarantee full compatibility with all USB storage media. For this reason
there may be problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Insert a USB storage medium directly into the corresponding con-
nection of the DVD player (Fig. 1/10).
2. Press the USB button (Fig. 3/9) on the remote control in order to
turn the DVD player to the file mode.
3
. Use the Cursor Buttons (Fig. 3/ 0) to select „USB" mode. Confi rm
7)
with the ENTER (Fig. 3/ button.

NOTE:
In order to find out which files can be played back the DVD player
now reads the contents of the storage medium. In the case of large
storage media this procedure may take a long time.
. Select the desired file(s) und start playback ➯ Page 52, „Selecting
4
file/directory and starting playback".
5 . If you would like to change back to DVD mode, press the USB button
(Fig. 3/9) again.
Use the Cursor Buttons (Fig. 3/ 0) to select
„DISC" mode. Confirm with the ENTER (Fig. 3/ button.
Media may contain a large number of data/files. You must therefore first
determine the data to be played.
1. If this has not yet taken place: Insert the CD or DVD in the drive. The
file selection dialogue appears. This dialogue is structured as follows:

Directory overview (1)

File overview (2)

Currently selected directory and probably the selected file (3):
The directory name appears in square brackets.
Example: „[Directory1]Filename2.jpg".

Button „Selection Audio Files" (4): Music files are displayed.
3
7)
3
3
7)
17.07.2009 12:59:30 Uhr
the
the