Herunterladen Inhalt Inhalt Diese Seite drucken

Duravit Blue Moon Montageanleitung Seite 6

Mit wannenverkleidung (freistehend)
Vorschau ausblenden Andere Handbücher für Blue Moon:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Important information
About the mounting instructions
These mounting instructions comes as part of the Duravit
pool and should be read carefully prior to installation.
Explanation of the key words and symbols
WArNINg! At medium risk of serious injuries
NOTE!
For avoiding property damage
Link to the Electrical Installation section
Link to installation information in this section
Inspect to check for leaks and leak-tightness
Indication of the temperature
Target group and qualification
The pool must only be installed by trained plumbing
engineers. The electrical installation may only be carried
out by qualified electricians.
NOTE! Local installation regulations and any country-
specific standards must be observed at all times.
Safety advice
Warning!
Do not remove the protective cover
The protective cover must only be opened by a qualified
electrician for the electrical installation or by our Service
team.
6
POOL_M_BlueMoon_FST_MV-AV/12.03.1
Installation information
Please read pre-installation data sheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
NOTE! Do not dismantle individual components
The individual components of the pool must not be
dismantled otherwise the guarantee will expire.
2
Base plate (Diagram 2)
> The waste water connection needs to have an ope-
ning with a diameter of 100 mm.
11
NOTE! risk of injury from the pool tipping over
(Diagram 11)
> Select the fixings according to the subsurface of
the installation site.
13
Installing a water intake (Diagram 13)
> Install a water intake, as applicable.
16
Checking the whirl system (Diagram 16)
> Switch on the whirl system for 10 minutes:
run this through once completely in the case of
circuits with different levels of intensity.
> Leave the water in the bathtub and wait 10
minutes.
> Check to make sure that it is leak-tight.
> If adjustments are required, repeat the check.
18
NOTE! Taking maintenance into account! (Diagram 18)
> The panel must be accessible and removable for
maintenance.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Blue moon 710143Blue moon 710169

Inhaltsverzeichnis