Technical Specifications; Cleaning And Storage; Waste Disposal And Environmental Protection - FLORABEST FHV 32 A1 Betriebsanleitung

GB
Operating instructions
• Scarifying is best done in spring be-
cause the lawn is particularly ready to
regenerate at that time.
• Scarifying becomes easier the shorter
you cut the lawn beforehand.
• Do not work on a wet lawn.
• Move the unit across the lawn such that
it does not cut into the ground for more
than 1-2 cm.
• After scarifying is a good time to fertilise
the lawn and to sow any bald patches.

Cleaning and storage

Wear gloves when handling the
blade cylinder.
• When you are finished, remove all
plant debris from the wheels and the
blade cylinder. Do not use hard or
pointed tools since they might dam-
age the unit.
• When you are finished, replace the
blade cover over the blades on the
cylinder and hook the metal bows into
the rail.
• Keep the unit out of the reach of chil-
dren.
Waste disposal and envi-
ronmental protection
Return the tool, accessories and packag-
ing to a recycling centre when you have
finished with them.
Hand over the device at an utilization loca-
tion.
Ask our Service-Center for details.
4

Technical specifications

Working width .....................32 cm
Total length of handle ....................180 cm
Weight .............................................2.5 kg
Guarantee
• This appliance has a 36-month guar-
antee; a shorter 12-month guarantee
applies if the appliance is to be used
for commercial purposes or for re-
placement appliances according to
statutory regulations.
• Justified guarantee claims should be
reported to our Service Center (see
cover page for telephone & fax no.s,
and email address). Our Service Team
will tell you more about our complaints
handling procedure.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
This requires that the appliance is
returned to our service center undis-
mantled and with proof of purchase
and guarantee.
• Devices sent in freight collect - by bulk
freight, express or with other special
freight - are not accepted.
• Defective units returned to us will be
disposed of for free.