Noise/Vibration Information; Starting Operation - Bosch CityMower 18 Originalbetriebsanleitung

Charger
Weight according to
EPTA‑Procedure
01:2014
Protection class

Noise/Vibration Information

Typically the A-weighted noise levels of the product are:
Noise emission values determined according to EN 60335-2-77.
– Sound pressure level
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60335-2-77
– Vibration emission value a
h
– Uncertainty K
Mounting and Operation
Action
A)
Delivery scope
Mounting the handle
Snap together the Grassbox
Grassbox fitting/removing
Setting the height of cut
Inserting the battery
Operation
- Inserting the isolator switch
- Switching on
- Mowing
- Switching off
- Removing the isolator switch
Removing the battery
Working advice "mowing"
Blade maintenance/Blade replacement
Selecting accessories
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Starting Operation

For Your Safety
Warning! Switch off, remove the isolator switch and
u
the battery before adjusting or cleaning. The same ap-
plies when the cable to the switch in the handle is
damaged, cut or entangled.
The blade continues to rotate for a few seconds after
u
the machine is switched off.
Bosch Power Tools
AL 1810 CV
kg 0.17
/ II
u
Charging the Battery
Figure Page
The battery is equipped with temperature monitoring that al-
A 303
lows charging only in the temperature range between 0 °C
B 304
and 45 °C. In this manner, a high battery service life is
C 305
achieved.
Note: The battery is supplied partially charged. To ensure
D 305
full battery capacity, completely charge the battery in the
E 306
battery charger before using for the first time.
F 306
The lithium-ion battery can be charged at any time without
G − I 307 −
reducing its service life. Interrupting the charging procedure
309
does not damage the battery.
The "Electronic Cell Protection (ECP)" protects the lithium-
ion battery against deep discharging. When the battery is
discharged, the machine is switched off by means of a pro-
tective circuit: The garden product no longer operates.
J 310
Do not continue to press the On/Off switch after an auto-
matic shut-off of the machine. The battery can be dam-
K 310
aged.
L 311
Observe the notes for disposal of the battery.
M 312
Inserting/Removing the Battery
Note: Using unsuitable batteries can lead to malfunctions or
damage the machine.
Insert the charged battery. Ensure the battery is inserted
correctly.
To remove the battery from the machine, press the battery
unlocking button and pull the battery out.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the charger is plugged into a socket outlet and the battery is
inserted onto the charger .
AL 1815 CV AL 1830 CV
0.38 0.40
/ II
dB(A)
dB(A)
dB
2
m/s
2
m/s
Caution: Do not touch the rotating blade.
F 016 L81 908 | (12.04.2019)
English | 17
AL 1880 CV
0.60
/ II / II
3 600 HB9 A..
69
89
=1.0
< 2.5
=1.5