Warranty Terms - EasyGO 2 of US Gebrauchsanweisung

WD-40.
8. Safety belts and other adjustable elements should be
checked regularly.
9. Sand, salt and other contaminants should be removed
from wheels, breaks and suspension regularly. Do not use
lubricant in places exposed
to sand ingression.
10. Avoid contact with salt water (seawater, sea breeze,
road salt) in order to prevent corrosion.
11. Stroller functional temperature range: from -5
to +35 °C.

wARRANTY TERMS

1. EURO-CART SP. Z O.O. grants a warranty for the
product you purchased for a period of 12 months from the
purchase date.
2. All complaints should be reported to the seller of the
product.
3. In order for a complaint to be processed a correctly
completed warranty card found at the back of these
instructions together with proof of purchase have to be
presented.
4. The product's physical defects which come to light
during the warranty period shall be remedied free of
charge within 14 days of the product being delivered via
the seller to EURO-CART SP. Z O.O.
5. All repairs shall be performed by
EURO-CART SP. Z O.O. or a service point
as advised by the seller.
6. The warranty does not cover:
• Damage occurred for reasons attributable to the user,
• Damage occurred as a result of failure to observe
recommendations, warnings and restrictions found in the
user manual and on product elements,
• Consumables subject to natural wear and tear during
normal usage such as: tyres, inner tubes, tread, materials
EN
used on handles, structure and colour of fabrics and
materials subject to friction, sleeves in wheels, axels,
prints,
• Damage occurred as a result of failure to observe
maintenance guidelines such as: corrosion, changed
upholstery or plastic elements colour as a result of
prolonged exposure to sunlight, damage to plastic
elements of upholstery as a result of prolonged exposure
to sunlight or excessive temperatures, excessive play,
squeaking / creaking noises, damage to mechanism due
to contamination,
• Damage occurred due to repairs being carried out by
unauthorised persons,
• Difficulties with reversing a "stroller" type stroller (this is
normal),
• Single wheels being pushed into a vertical position as a
result of loading (this is normal),
• Damage and soiling occurred due to the product being
incorrectly packaged for shipment by courier (for internet
purchases),
7. The warranty period shall be extended by the repair
time at EURO-CART SP. Z O.O.
8. The repair method shall be determined by the
guarantor,
9. The product subject to a complaint should be provided
clean,
10. The warranty is valid within the European Union,
11. The consumer goods warranty does not exclude or
suspend the purchaser's rights stemming from goods non-
compliance with the agreement.
10
USER INSTRUCTIONS
UNFOLDING THE STROLLER
In order to unfold the stroller, release the automatic lock
(fig. 1), and pull the stroller guiderail upward until fully
unfolded (fig. 2, 3).
ATTACHING AND DETACHING REAR wHEELS
To attach rear wheels you must first attach the half axles
in rear suspension. Slide the pointed end of the half axle
into the opening in rear suspension (fig. 4). It should
automatically click in place. Then slide the wheel onto the
half axle and push until it clicks in place (fig. 5).
NOTE! Before starting to use the pram, make sure that all
the wheels have been assembled correctly.
To disassemble the rear wheels, press down the button
in the central part of the wheel (Fig. 6) and remove the
wheels from the axle (Fig. 7). To detach the rear half axle
push the button in rear suspension and remove the half
axle (fig. 8).
ASSEMBLING AND DISASSEMBLING THE FRONT
SwIVELLING wHEELS
In order to assemble the front wheels, force their axles in
the ends of the front legs, until you hear a characteristic
"click" (Fig. 9). In order to disassemble the wheels press
down the button at the upper part of the swivelling
mechanism (Fig. 10) and slide the wheel axle in.
The stroller has swivel wheels, which may be locked in a
forward facing position. In order for the wheels to swivel,
twist the knob in the upper part of the wheel mount in an
anti-clockwise direction. To lock the wheels turn the knob
in a clockwise direction (fig. 11).
HANDLE HEIGHT ADJUSTMENT
It is possible to adjust the pram handle height. To perform
the adjustment, press down the round buttons on both
sides of the handle at the upper part, and then adjust the
right height (Fig. 12).
PARKING BRAKE
The pram is equipped with a rear parking brake. To
engage the brake, press its lever down (Fig. 13). In order
to disengage it, lift the lever.