Warranty Terms - EasyGO domino Bedienungsanleitung

such as WD-40.
8. Safety belts and other adjustable elements
should be checked regularly.
9. Sand, salt and other contaminants should be
removed from wheels, breaks and suspension
regularly. Do not use lubricant in places exposed
to sand ingression.
10. Avoid contact with salt water (seawater, sea
breeze, road salt) in order to prevent corrosion.
11. Stroller functional temperature range: from -5
to +35 °C.

wARRANTY TERMS

1. EURO-CART SP. Z O.O. grants a warranty
for the product you purchased for a period of 12
months from the purchase date.
2. All complaints should be reported to the seller of
the product.
3. In order for a complaint to be processed a
correctly completed warranty card found at the
back of these instructions together with proof of
purchase have to be presented.
4. The product's physical defects which come to
light during the warranty period shall be remedied
free of charge within 14 days of the product being
delivered via the seller to EURO-CART SP. Z O.O.
5. All repairs shall be performed by
EURO-CART SP. Z O.O. or a service point
as advised by the seller.
6. The warranty does not cover:
• Damage occurred for reasons attributable to the
user,
• Damage occurred as a result of failure to observe
recommendations, warnings and restrictions found
in the user manual and on product elements,
• Consumables subject to natural wear and tear
during normal usage such as: tyres, inner tubes,
tread, materials used on handles, structure and
colour of fabrics and materials subject to friction,
EN
sleeves in wheels, axels, prints,
• Damage occurred as a result of failure to
observe maintenance guidelines such as:
corrosion, changed upholstery or plastic elements
colour as a result of prolonged exposure
to sunlight, damage to plastic elements of
upholstery as a result of prolonged exposure to
sunlight or excessive temperatures, excessive
play, squeaking / creaking noises, damage to
mechanism due to contamination,
• Damage occurred due to repairs being carried
out by unauthorised persons,
• Difficulties with reversing a "stroller" type stroller
(this is normal),
• Single wheels being pushed into a vertical
position as a result of loading (this is normal),
• Damage and soiling occurred due to the product
being incorrectly packaged for shipment by courier
(for internet purchases),
7. The warranty period shall be extended by the
repair time at EURO-CART SP. Z O.O.
8. The repair method shall be determined by the
guarantor,
9. The product subject to a complaint should be
provided clean,
10. The warranty is valid within the European
Union,
11. The consumer goods warranty does not
exclude or suspend the purchaser's rights
stemming from goods non-compliance with the
agreement.
10
USER INSTRUCTIONS
UNFOLDING TEH STROLLER
In order to unfold the stroller, release the automatic
lock (fig. 1), and pull the stroller guiderail upward
until fully unfolded (fig. 2, 3).
ATTACHING AND REMOVING THE wHEELS
In order to attach the front wheels, push their hubs
into the handles on the ends of the front tubes (fig.
4). In order to remove the wheel, press the button
on the back of the wheel and pull the hub from the
handle (fig. 5).
In order to attach the rear wheels, push their hubs
into the handles on the rear suspension of the
stroller (fig. 6). In order to remove the wheels, pull
down the metal lock at the bottom of the handle
and slide the hub (fig. 7).
THE SYSTEM OF ROTATING FRONT wHEELS
The stroller has a system of rotating front wheels
with the possibility of locking of moving straight on.
In order to rotate the wheels, move up the lever
in the front part of the wheel. In order to lock the
wheels to move straight on, move the lever down
(fig. 8).
ASSEMBLY OF THE CANOPIES
In order to assembly the canopy, insert its hooks
on the handles on the stroller frame (fig. 9). Set the
canopy in the desired position.
ASSEMBLY AND REMOVING THE BAR
In order to assembly the bar, insert its hooks on the
handles on the seat side tubes (fig. 10). In order
to remove it, push the buttons located in the lower
part of the handles and slide the clips out (fig. 11).