Attaching The Strap; Loading The Batteries - Olympus D-380 Anleitung

ATTACHING THE STRAP

1
Thread the short end of the strap through
the strap eyelet.
2
Thread the long end of the strap through
the loop that has already gone through the
eyelet.
3
Pull the strap tight, making sure that it is
securely fastened and will not come loose.

LOADING THE BATTERIES

1
Make sure that:
• The monitor is off.
• The lens barrier is closed.
• The green lamp is off.
2
Slide the battery compartment cover
in the direction of
indicated by the
cover), and lift it up in the direction
of .
3
Insert the batteries, making sure that
they are correctly oriented as shown
in the illustration.
When using
AA (R6)
batteries
4
Close the battery compartment
cover in the direction of
pressing the
the cover in the direction of
If the battery compartment cover will not
close easily, do not force it. Try pressing
[OPEN] and the
hands.
(the direction
mark on the
When using
lithium battery
packs
. While
mark, slide
.
mark with both
Battery insertion
direction mark
En 7
En