Installing Your Dynamo 640Ai; Getting Started - Fujitsu DynaMO 640 AI Benutzerhandbuch

2. Installing Your DynaMO 640AI

2.1 Getting Started

2. Frame
4. Emergency Eject Hole
1) Turn off your PC.
2) Remove the AC power cable from your PC.
Static electricity can damage your PC or your
DynaMO 640AI drive. Use a grounding wrist strap
during the installation of the DynaMO drive. If you
do not have a grounding wrist strap, you can
discharge static electricity by touching one of the
connectors on the back of your PC.
1. ATAPI MO Drive
3. Busy Indicatior
Eject Button
5. Power Connector
Failure to remove the AC power cable from your
PC may result in an electrical shock hazard to you
or damage to your PC and MO drive.
7. Jumper Pins
6. IDE Interface Connector
1.9