Inhaltsverzeichnis
Werbung
8
X-TOUCH MINI
X-TOUCH MINI Hook-up
(EN)
Step 1: Hook-Up
USB A
Laptop
USB Mini-B
9
Quick Start Guide
X-TOUCH MINI Controls
(EN)
Step 2: Controls
(1)
(2)
(3)
(7)
(1)
Push encoder knobs - there are 8 endless encoders,
each with a detent and push function (not illuminated),
and a 13-segment amber LED ring. These knobs are typically
used in Digital Audio Workstation (DAW) applications for
fi ne control of parameters such as Pan control of Ch. 1 to 8,
or individual level adjustments.
(2)
Select buttons - there are 2 x 8 soft touch buttons with
amber backlit LEDs. These are typically used for DAW mixer
applications (e.g. Solo, Mute of Ch. 1 to 8), DAW transport
applications (e.g. play, rec, stop), lighting applications
(spotlight on/off ), and sample triggering (notes on/off ).
(3)
MC button - this standard select button can also be used to
switch the unit between Mackie Control mode and standard
mode as follows: Press and hold it down while connecting
the unit to a live computer's USB port. Release the
MC button when the MC MODE LED on the right lights
continuously. The mode is remembered after power-off and
unplugging from the USB port. Repeat this procedure to
change the unit back to standard mode.
(4)
(5)
(6)
(4)
MC MODE LED - this amber LED lights when the unit is
operating in MC mode.
(5)
Layer A and B buttons - these 2 soft touch buttons with
amber backlit LEDs, allow selection between preset A or
preset B in standard mode: Press "A" to select "Preset A,"
press "B" to select "Preset B." In MC mode, there are
diff erent assignments. See MIDI Map on page 14.
(6)
Fader - this standard non-motorized 60 mm fader
is typically used for the control of level functions in
DAW applications.
(7)
USB Mini-B connector - this connects to a computer's
USB A port for bus-powering and data transfer
(send/receive). The unit is USB powered through this
connection. (Plug directly to the computer's USB A port,
and not to a keyboard's USB port.)
Werbung
Inhaltsverzeichnis
