Herunterladen Diese Seite drucken

Fitting Instructions - R&G LP0266BK Montageanleitung

Kennzeichenhalter ktm 690 smc-r 2019

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Page 8 of 24
Picture 29

FITTING INSTRUCTIONS

Remove the seat using the pull cable arrowed in picture 1.
Remove the two bolts and spacers arrowed in picture 2.
Remove the bolt arrowed in picture 3 (this allows easier removal of the fuel cap surround).
Remove the bolt arrowed in picture 4.
Remove the two bolts and spacers arrowed in pictures 5 and 6, then carefully remove the fuel cap
surround as shown in picture 7.
Remove the four bolts arrowed in picture 8.
Unplug the rear light and indicator wiring plug socket as arrowed in picture 9.
Unplug the individual rear light and indicator wiring plug sockets as arrowed in picture 10.
If you intend to re-use the OEM indicators, then remove the indicator mounting nut arrowed in pictures
11 and 12 (noting which side they were removed from).
Remove the two bolts arrowed in picture 13.
Feed the wires from the new rear light (item 17) through the rear light shroud (item 16) as shown in
picture 14 and push the shroud over the rear light (please ensure the licence plate illuminator faces
away from the shroud).
Offer this assembly into the two slotted holes in the new licence plate bracket (item 1) as shown in
picture 15, then secure using the nuts and washers supplied as shown in picture 16 (Please use the heat
shrink (item 19) to protect the new rear light wiring).
Cut to size and stick the foam strip (item 20) to the upper face of the light shroud.
If using R&G mini indicators
If using mini indicators, fit the indicators of choice to the new licence plate bracket (item 1) (R&G
mini indicator product code RG371 for LED type or RG372 for Aero Style led type) as shown in
picture 18. Use the two rubber grommets (item 14) to plug the unused holes as arrowed in picture 17.
Secure the mini indictor in position using the M8 nut provided as shown in picture 19.
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
R&G Racing
Email:
info@rg-racing.com
LP0266
Picture 30
www.rg-racing.com

Werbung

loading