Attention!! The program 3 is working with random generators. This generator reacts as well if you
connect more than one controller. That creates an unique effect with different stripes for example at a
thunder storm simulation when some flashes coming from left and some from the right, random and
naturally. It is not possible to use a dimmer for this program.
Program 4:
is
Mikrophon
Comming in function
This function is used to glue the stripe just around a door, and to adjust the
mic pointing to the doorframe. In this case the mic should be adjusted to a real
fitting sensitivity. The effect is that every time when you enter the door, and it
night, you don't have to search for the light switch. Because of the noise the
stripe lights up and makes it easy for you to find the switch in the darkness.
Make sure you adjust the mic well and adjusted the sensitivity well, that it
doesn't react to every noise.
X S P R O S I N G L E C O N T R O L
Stripe
Lichtschalter
9 / 12