Configuration
System settings
The WTC Room Control Interface allows the
user to set a number of control parameters.
Upon entering the system configuration, the following screens are displayed:
Modifying system settings
1. Press and hold the Menu button
5 seconds to access the Configuration
menu.
2. Press the Up button
button
to go to the System menu.
3. The password menu will be displayed
(10000 is shown on the display).
4. Press the Down button
password to 9021.
5. Press the Menu button
password. Upon submitting the password,
the System sub-menu appears.
TIP: Keep the Up button
Down button
pressed to scroll rapidly.
8
for
or the Down
Screen Timeout:
10 seconds
to set the
to confirm the
or the
System configuration may differ depending
on the type of the fan coil.
Example:
Adjusting the display contrast
1. Once you have accessed the System
menu, press the Menu button
times until the Contrast menu is displayed.
The menu name is displayed in the
upper-right corner of the screen.
2. Press the Up button
button
to set the contrast ratio of the
screen.
3. Once the contrast is set, press the Menu
button
to go to the next screen.
4. To exit the System menu:
Press and hold the Menu button for
■
5 seconds
Wait 30 seconds until the default
■
screen appears
several
Screen Timeout:
30 seconds
or the Down