Crivit IAN 103856 Gebrauchsanleitung Seite 7

• I f the helmet is too large (wiggles, cannot be adjusted tightly
enough) or too small (pinches, forehead exposed), please select
the next larger or smaller size.
• N ever use the helmet if it cannot be adjusted correctly.
Adjusting the chin strap (Fig. C)
The general length of the chin strap can be adjusted with the loop.
You may also use the strap divider clip to adjust the length of the chin
strap. However, please be sure the strap divider does not bother you.
Headband width adjustment (Fig. D)
Use the wheel for variable adjustment to your head size to ensure
the helmet is seated optimally. Turn the wheel clockwise to tighten the
headband and counter-clockwise to loosen the headband.
Headband height adjustment (Fig. E)
The height of the headband system can be adjusted to fit.
There are 2 different height adjustments. Pull the headband system
connection pins out of the locking points in the EPS shell. You can
now attach the headband system pins in other locking points higher
or lower. Push the pins into the locking points until you hear and feel
them lock in. Both pins must always be locked in.
GB 9