Resetting The Microprocessor; Setup Menu - Pioneer MVH-MS410BT Bedienungsanleitung

Resetting the microprocessor

The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Remove the front panel (page 4).
2
Press the RESET button with a pointed instrument longer than 8 mm.

Setup menu

When you turn the ignition switch to ON after installation, the setup menu appears in
the display.
NOTE
If your boat's ignition has no ACC position, some settings are not saved to the memory. To save, detach
the front panel or wait for the unit to shut off completely 10 seconds after turning it off by pressing and
holding SRC/OFF (when [ON] is selected in [PW SAVE]), then turn the ignition off.
1
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item
LANGUAGE
[ENG](English),
[РУС](Russian),
[TUR](Turkish),
[FRA](French),
[DEU](German)
CLOCK SET
RESET button
Description
Select the language to display the text information from a
compressed audio file.
Set the clock.
1 Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
2 Turn the M.C. dial to adjust the minute, then press to confirm.
- 5 - - 5 -