Display Instruction - Ayce DF-AT0900F Gebrauchsanweisung

MODE
The initial wind mode is "Normal", press button to set wind mode
and shift as the rule of "Normal"-"Natural" -"Sleeping"-"ECO"-
Normal... The LED lights show accordingly. (No display for NORMAL
mode.)
Working rule of wind modes:
1. Normal
LOW speed MED speed
2. Natural
Oscillogram for 3 natural wind(HI, MED, LOW )
3. Sleeping
(a) HI: 30 minutes "HI" natural wind—30 minutes "MED" natural wind—Remain
"LOW" natural wind speed.
(b) MED: 30 minutes "MED" natural wind—Remain "LOW" natural wind speed.
(b) LOW: Remain "LOW" natural wind speed.
HI speed
4. ECO
Under this mode, the machine works in Low speed when ambience
temperature ＜ 25 ℃ ; in Hi speed when > 29V; in Med speed when 25°C~29°C.
Memory function without power off., which can memory the working status
before turn off (not for power off), expect timer & mode function.
AUTO DIMMING FUCTION:
The LED lights will dim 30% automatically without operation more
than 1 minute.

DISPLAY INSTRUCTION:

1. Double 8 digital display 15*14mm , 0.36inch Common Cathode.
2. Ten LED lights as below, except the digital display.
Low
MED
ON/OFF
Hi
RC Receiver
Temperature
Timer
Digital Display ECO
62 63
Sleeping
Natural
Swing