Installation Instruction - Ayce LHB42-1-R Gebrauchsanweisung

INSTALLATION INSTRUCTION

WARNING: Turn off the power to the electrical panel to prevent
electric shock. To reduce the risk of fire, you had better mount
a metal outlet box to the building structure. Tools Required for
Assembly (items not included): Phillips screwdriver, Slotted
screwdriver, wrench, step ladder, electrical tape.
Carefully unpack and check all parts
1.
to ensure there are no missing parts.
Turn off the power to the electrical
panel to prevent outlet box.
Attach mounting bracket to outlet box by using two screws and
2.
flat washer. Securely tighten two outlet box screws. To maxi-
mize fan performance, be sure to secure the mounting bracket to
the ceiling and position it horizontally. Pull power supply wires
out of outlet box and through the hole in the mounting bracket.
3. When installing the fan, please make sure to install a wall-
mounted fixed on/off power switch as below, to ensure that
the fan power supply can be cut-off in case of any danger or
maintenance (fixed wall switch not include)
220-240 V
LIVE (L)
NEUTRAL (N)
GROUND
4. To connect power supply from the ceiling and fan, refer to
the cable schematics as below.
AC
BROWN
BLUE
BLUE
IR SENSOR
BROWN
BLUE
5. Carefully insert the fan into the mounting bracket. Rotate
the fan until the notch (1) of the hanger ball engages the
pin (2) of the mounting bracket. Then, firmly fix the screws.
42 | 43
GB
IR SENSOR