Weidmuller Klippon TB QL Montagerichtlinien Seite 9

Internal/External Earth Stud Assembly
The drawing below provides a profile of the earth stud.
G F E A C B D G E F G
outside enclosure inside enclosure
A 1 x earth bolt M10
B 1 x washer Ø 20 mm t = 2 mm
C 1 x silicone O- Ring
D 1 x washer (lug) Ø 20 mm
E 2 x clamping bracket
F 2 x washer (lug) Ø 15 mm
G 3 x nut M10 Torque: 15 Nm
Lid Earth Screw Assembly
Attach the cable lug to the earth screw followed by the spring washer and
tighten the complete assembly with a nut (with a torque of 6.0 Nm).
9