Dispensing Steam - Saeco Talea Ring Plus Bedienungsanleitung

DISPENSING STEAM

DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS
POSSIBLE. THE HOT WATER/STEAM SPOUT MAY REACH HIGH TEMPERATURES: DO NOT
TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY.
1
Place a container with the
beverage to be warmed up
beneath the steam spout.
4
brewing in progress
steam
The display shows "brewing in
progress... steam"
7
Repeat the operation to
heat another beverage.
After dispensing, clean the steam spout as described on page 34.
Downloaded from www.vandenborre.be
2
selected
steam
Press the button.
5
Heat the beverage; move the
container while heating.
13
3
Turn the knob to the
position.
6
the knob until it is in the rest
position ( ).