Bottom Of The Dial Controller - Samsung VL Serie Bedienungsanleitung

Bottom of the Dial Controller

❚
1
Remove the cover at the bottom of Dial Controller and then turn on the power.
• Charge your Dial Controller before turning the power on.
1
DC 5V IN Jack
CONNECT
2
Button
2
Check the LED status (blinking in pink). If the battery level is low, charge the Dial Controller by
connecting the Micro USB cable. (For more information about the LED display, see page 7.)
 It takes approximately 3 hours to fully charge the battery. Fully charged battery can last up to 90 days.
 Battery life is subject to use conditions and environment.
 The
RESET button is for troubleshooting.
Connect the Micro USB cable to charge the Dial Controller.
Try connecting to a Speaker.
ENG - 8
DC 5V
IN
RESET CONNECT
RESET Button
1
2