Basic Operations; Turning On The Wireless Function; Getting Started; Turn On The Power - JVC SP-AP1-W Bedienungsanleitung

Basic operations

Turning ON the wireless function

When the system and the wireless function are
turned ON, you can enjoy audio from AirPlay/
DLNA and BLUETOOTH sources.
• The wireless function is turned OFF when
shipped.
1

Turn on the power.

Remote control
2
Press [NETWORK SETUP] on the System
for 3 seconds or longer.
System
(press and hold)
• The NETWORK indicator flashes in red for
30 seconds or longer until the wireless
function turns ON.
• The NETWORK indicator stays lit in white or
flashes in white while the wireless function is
ON.
When the When the wireless function is ON
wireless
function is
OFF
Lights in
white (when
connected to
Unlit
a network)
• To turn the wireless function OFF, press
[NETWORK SETUP] on the System for 3
seconds or longer.
• If the wireless function is ON, BLUETOOTH
can be used regardless of the network
connection status.
8
English
1
• When the power is turned on, the last used
2
System
• Press [INPUT] to change the source.
• When the audio source is changed, the front
Flashes in
white (when
or
not connected
to a network)

Getting started

Turn on the power.
Remote control
audio source is selected.

Select a source.

/ /
• BLUETOOTH cannot be selected when
the wireless function is OFF.
System
When the wireless function is ON
BLUETOOTH \ USB
AUDIO IN | DIGITAL IN
When the wireless function is OFF
USB \ DIGITAL IN
AUDIO IN
indicator lamp lights for 3 seconds in one of
the colors listed below.
AirPlay
DLNA
BLUETOOTH
USB
DIGITAL IN
AUDIO IN
• When playback of an AirPlay/DLNA
device is started, the source automatically
changes.
• The source does not automatically
change when a BLUETOOTH device is
connected. Use the remote control or the
System to change the source.
System
/
White
Green
Blue
Pink
Yellow
Red