Installation - JVC SP-AP1-W Bedienungsanleitung

Introduction
Auto power save function (A.P.S.)
• When no operation is done in certain situations for 15 minutes, the System turns off
automatically (Auto power save). (page 22)
In this manual...
• The remote control buttons are used for
explaining the operations unless otherwise
specified. Buttons with no specification
are remote control buttons. However, if the
System has similar or identical buttons, they
can also be used for the operations.
(Example 1)
Getting started
1
Turn on the power.
Remote control
This diagram shows a button
being pressed once and then
immediately released.
Most of the operations on
this System are performed by pressing
the button in this way (short press). When
the button should be pressed repeatedly,
"press repeatedly" is written underneath
the button.
(Example 2)
Disconnecting BLUETOOTH devices
(hold)
This diagram shows a button
being pressed and held.
Buttons are pressed in this
way, (press and hold) or (hold),
for some operations, such as fast forward.
Rating label and other information are placed
on the exterior of the bottom.
2
English
System
Notation in this manual
• In this manual "Android devices" includes
smartphones and tablets that use an
Android operating system.

Installation

Caution: Proper Ventilation
To avoid risk of electric shock and fire, and
to prevent damage, locate the apparatus as
follows:
1 Front: No obstructions and open spacing.
2 Sides/ Top/ Back: No obstructions should
be placed in the areas indicated by the
dimensions in the illustration.
3 Bottom: Place on a level surface.
Front view
15 cm
Side view
Notes on installation
• Select a place which is level, dry and neither
too hot nor too cold–between 5˚C and 35˚C.
15 cm
15 cm
15 cm