Changing The Brightness Of The Illumination; Auto Power Save (A - JVC SP-AP1-W Bedienungsanleitung

Other operations (continued)
Changing the brightness of the
illumination
The brightness changes each time the
button is pressed.
DIM OFF: Normal brightness
DIM 1: Becomes dimmer
DIM 2: Becomes even dimmer
DIM 3: No illumination
Auto Power Save (A.P.S.)
If no operation is performed for 15 minutes in
the following situations, the System turns off
and goes into network standby mode (when
the wireless function is ON). (page 9)
– The system is muted, or the volume is set to
minimum.
– The audio source is "AirPlay/DLNA", but
nothing is playing.
– The audio source is "USB", but nothing is
connected.
– The audio source is "BLUETOOTH", but no
BLUETOOTH device is connected.
– The audio source is "DIGITAL IN", but
nothing is connected to the DIGITAL IN
terminal.
– The audio source is "AUDIO IN", but
nothing is connected to the AUDIO IN
terminal.
• If any button is pressed, the System will
restart the 15 minute countdown.
• When the wireless function is OFF, the
System goes into normal standby mode.
(page 9)
22
English