Services; Language; Time & Date - Watts Water Technologies LCD+ Bedienungsanleitung

Quick Start menu step by step:
1/ Language choice

Service

English
Time and date
System
Outputs Config.
Inputs Config.
Energy Measurements
Protection func.
- Choose your language with (+) or (-) and press (►) key to
accept.
2/ Time and Date adjustment

Time & Date

Time
Date
Thursday
24/12H clock
D.S.T.
- Adjust the hour with (+) or (-) and press (►) key to accept.
- Adjust the minutes and press (►) key to accept and skip to
the next line.
The controller will skip automatically to the date line, you can
now:
- Adjust the month with (+) or (-) and press (►) key to accept.
- Adjust the day number with (+) or (-) and press (►) key to
accept.
- Adjust the Year with (+) or (-) and press (►) key to accept.
The controller will skip automatically to the clock format line, to
allow you to adjust the time format. Alter with (+) and (-) press
(►) key to accept.
It is possible to select if you require Daylight summer time
advance function with (+) and (-) press (►) key to accept.
3/ System choice
T1
P1
T2
Select the required system with (+) or (-) press (►) key to
accept.
Following system selection, you will be prompted to adjust the
selected system parameters. Proceed to adjust the system
values with (+) or (-) press (►) key to accept and continue to
the following step in the configuration.
--- -
-
--- -
08:25
02/03/2011
24H
Yes
T1 _ _ _°C
T2 _ _ _°C
P1 _ _ _ %
System
1
4/ Output configuration


Type
Speed Control
Min rev pump
Max rev pump
Select the device connected on the output of your controller
(i.e. standard Pump, PWM pump or 3-way valve) with (+) or (-)
press (►) key to accept and finish the configuration.
N.B.. Depending on the system choice you may be prompted
to configure the P2 output also.
T1 T4
Now your controller is now set-up.
Note:
It is possible to restart the "quick start menu" operation and
follow the steps above to configure again, alternatively it is
possible to directly access a specific parameter throught the
normal menu structure if you have made an error during the
configuration.

2 Services


Service

English
Time and date
System
Outputs Config.
Inputs Config.
Energy Measurements
Protection func.
Degrees
Tube collectors
Factory setting
Quick Start menu
2.1

Language

- With (+) or (-) select the line "English" and press (►) to
highlight the line.
- Now you can change the language with (+) or (-), you have
the choice between: English, Deutsch, Français, Español,
Italiano, Nederland, Magyarul, and Portugës.
2.2 Time & Date
With (+) or (-) select the line "Time & Date" and press (►)
It is now possible to select the line which requires adjustment
with by pressing (+) or (-), when the correct line is selected
press (►) to highlight the line.
Then use the (+) or (-) to alter the value.
Time,
- Press (►) once to allow adjustment of the hour.
- Press (►) for a second time to allow adjustment of
the minutes.
- Depress (◄) twice to return to the line selection.
5
Pump 1 ---
Std Pump
Yes
0%
100%
T1_ _ _°C
T2_ _ _°C
SD
T3_ _ _°C
T4_ _ _°C
T3
P1_ _ _ %
_ _ _ KW
T2
_ _ _ KWh
°F
No
No
-
-