Commissioning And Maintenance; Function Check; Maintenance; Disassembly And Disposal - SSP ZEUS Betriebsanleitung

5 . Commissioning and Maintenance

5 .1 Function check

Check the enabling/operational unit before each commissioning. Ensure the following
before you start:
• Function of the enabling switch (enabling function in Level 2 and forced disconnection
in Level 3)
• The cable entry and connections are not damaged
• The housing and the rubber cap of the enabling switch are not damaged
• Depending on the design: Check of the integrated functions, such as emergency stop
button or stop button
Note
Damaged or defective devices must not be put into operation!

5 .2 Maintenance

No maintenance is required. Regular inspections of the electric and mechanic function
carried out by authorized personnel are necessary to ensure trouble-free long-term operation.
Remove contamination on a regular basis. Do not use any abrasive cleaning agents, only
use a moist cloth.
Check at regular intervals if the enabling switch (grip switch) is firmly seated.
In case of malfunction or damage the enabling switch has to be replaced.
According to intensity of use of the components, replace the enabling/operational unit.
Repairs must only be carried out by the manufacturer.

6 . Disassembly and Disposal

6 .1 Removal

Disassembly of the enabling/operational unit ZEUS should only be performed in a de-en-
ergized state.

6 .2 Disposal

The enabling/operational unit ZEUS must be disposed of properly in accordance with national
and local regulations.

7 . Equipment

7 .1 Equipment for ZEUS

Item
Brackets
Holding bracket for ZEUS
Safe Control Technology
Basic device for emergency off and safety door applications S series
Basic device for emergency off and safety door applications T series
Safety PLC
Denomination Item number
ZEUS H SP-X-85-800-00
SP-S-00-001-02
SP-S-00-002-02
MOSAIC M1 SP-R-11-000-00
7