Step 11 Configure The Control Panel Display Language (Optional) - HP LaserJet 8150 serie Leitfaden Zur Inbetriebnahme

Step 11 Configure the Control Panel Display
Language (Optional)
1
ENTER LANGUAGE
=ENGLISH
2
3
ENTER LANGUAGE
=ENGLISH
22 Printer Setup
Use the printer control panel to set the
printer to display printer messages and
print configuration pages in the language
of your choice.
1 When you turn the printer on for the
first time, wait until ENTER LANGUAGE
= ENGLISH appears. To change the
display language go to step 2, or to
choose English go to step 4.
If ENTER LANGUAGE = ENGLISH did
2
not appear, press and hold
while simultaneously pushing the
power switch ON. Hold
SELECT LANGUAGE appears, then
release S
ELECT
Note
Only -V +, S
ALUE ELECT
active while the display language is
being configured. All other keys are
ignored.
If you press Go without selecting a
language, the printer will bring itself
online and all subsequent messages will
be displayed in English. However, since
no display language was selected, the
ENTER LANGUAGE = ENGLISH message
will reappear (after the power-on self
test) every time the printer is turned on
until you select a language.
When ENTER LANGUAGE=ENGLISH
3
displays, press
until the desired setting appears.
Continued on next page.
S
ELECT
S until
ELECT
. Go to step 3.
, and G are
O
- V + repeatedly
ALUE
EN