Step 12 Test The Printer - HP LaserJet 8150 serie Leitfaden Zur Inbetriebnahme

Step 12 Test the Printer

1
READY
2
INFORMATION MENU
3
PRINT
CONFIGURATION
4
PRINT
CONFIGURATION
5
24 Printer Setup
Print a configuration page to make sure
the printer is operating correctly.
1 Make sure the printer is on and the
READY message is displayed.
2 Press M until the display reads
ENU
INFORMATION MENU.
3 Press I until the display reads
TEM
PRINT CONFIGURATION.
4 Press S
ELECT
configuration page.
5 The configuration page shows the
printer's current configuration.
Note
An HP JetDirect network configuration
page will also print for printers with
network cards installed.
to print the
EN