Use; Switching On And Use Of Profibus Gateway; Profibus Gateway Switching Off - Agilent Technologies TMP Profibus 969-9261 Bedienungshandbuch

Use

This paragraph details the fundamental operating procedures.
Make all electrical connections before the use of the system.

Switching on and Use of Profibus Gateway

To switch on the Profibus Gateway it is necessary to supply the
mains.
The red led on the Gateway front panel indicates the device is
powered. The green led indicates the device status:

Profibus Gateway Switching off

To switch off the Profibus Gateway it is necessary to remove the
mains.
TMP Profibus Gateway User Manual / 87-900-976-01 (F)
Blink slow: data exchange
1 pulse: RS 485 link problem (e.g. device is still searching
controller)
2 pulses: Profibus link problem (e.g. device not addressed from a
master)
Blink fast: internal error.
Instructions for Use

Use

145/178
17