Peiying PY-GPS7013 Bedienungsanleitung Seite 37

7.3 Power Status
Select "Power" to check the battery status. The cell bar is moving
when the battery is being recharged.
7.4 Sound Setting
A. Select "Volume" to access sound setting.
B. Tap the bar to adjust sound volume of speaker. Enable or
disable the touch tone. Select startup sound.
7.5 Time & Date
Select "Date/Time" to set up date and time of the device. You may
adjust year, month, day, hour and minute (24 hours format). Select
correct time zone as Time & Date can be updated automatically
while receiving GPS signal from the satellites.
7.6 System Info
Select "System Info" to view system information, such as SDRAM,
Flash, Store memory, Version and SN (Serial Number).
7.7 Stylus Accuracy Calibration
Select "Calibration" to adjust accuracy of touch pen. Follow the
instruction on the screen to carry out the calibration.
7.8 Update Logo
The function is for updating start-up logo of the device. Please be
sure you have stored the Logo pictures on the SD card.
7.9 GPS Path
Select "Navi Path" to setup GPS Map and software path for
navigation. Copy the files to the internal flash memory or put
them on the SD card. Select the path and folder to find the map
executive software (.exe) used, tap the file and tap "Navi Path",
check it and confirm.
7.10 USB
Select "USB" to select different mode while device is being
connected to PC: Mass Storage or MS ActiveSync.
Owner's manual
EN
37