Lindemann musicbook source Bedienungsanleitung Seite 31

TECHNICAL SPECIFICATIONS
Volume level control range: 0 to 99 with the following
charakteristic: 0 to 20 in 2 dB steps, 21 to 60 in 1 dB steps,
61 to 99 in 0.5 dB steps.
Balance control: + / - 6 dB in 1 dB steps
Frequency response: 2 – 200 kHz (-3 dB)
Gain: 0 dB / 6 dB / 12 dB switchable
THD & Noise: < 0.001 % @ 2.5 V output
Headphone
Headphone connector: 6.35 mm (1/4") jack socket
Headphone gain: 0 dB / 12 dB switchable
Recommended headphone impedance: 16 - 200 ohms
Damping factor of headphone output: >100
This unit contains Transmitter Module FCC ID: 2AJYB-S810. This de-
vice complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
WARRANTY
Our products are manufactured exclusively in Europe by ISO-cer-
tified plants. Each single device is then put to a full, also metro-
logical functional check at our premises. Therefore with a clear
conscience we grant an extended 3-year warranty period. An im-
portant prerequisite for making claims under this extended guar-
antee is the online registration on our website. We suggest you do
the registration right after purchasing the device.
Please note: the guarantee does not cover damages arising from
improper use of the device. Also excluded from warranty cover-
age are such devices which were opened or on which repair at-
tempts or modifications were performed by third parties. Liability
for consequential damages arising thereof is excluded. Moreover,
any liability beyond the product value is excluded. Any deviating
guarantee commitments by dealers shall not be binding for us.
EN 31
pTop