Herunterladen Inhalt Inhalt Diese Seite drucken

Disposal Information; Packaging - Bosch BSG8PRO series Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
en

Disposal information

Packaging

The packaging is designed to protect the vacuum
cleaner from being damaged during transportation. It
is made of environmentally friendly materials and can
be recycled.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many valuable
materials. Therefore, please take your used vacuum
cleaner to your retailer or recycling centre to be
recycled. For current disposal methods, please
enquire at your retailer or your local council.
Disposal of filters and dust bags
Filters and dust bags are made from environmentally
friendly materials.
As long as they do not contain substances that are
not permitted to be disposed of in the household
rubbish, you can dispose of them with your normal
household rubbish.
!
Please note
The mains socket must be protected by at least a 16
amp fuse.
If a fuse should blow when you switch on the
appliance, this may be because other electrical
appliances which have a high current draw are
connected to the same power circuit.
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it
is running.
Fold out picture pages.
Setting up
1
Figure
a) Insert the flexible hose adapter into the air intake open-
ing and allow it to engage.
b) To remove the flexible hose, press the two lugs together
and pull the tube out.
2*
Figure
a) Align and connect the handle and the telescopic tube.
b) Push the handle straight into the telescopic tube until it
engages.
To release the connection, squeeze the collar sleeve and
pull the handle out.
3*
Figure
a) Connect the floor tool and the telescopic tube together.
b) Push the telescopic tube straight into the
connecting piece of the floor tool until it
engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.
4*
Figure
Press the adjusting sleeve in the direction of the arrow
and adjust the telescopic tube to the length required.
5
Figure
Holding the power cord by the plug, pull out the required
length and plug the plug into the mains socket.
6
Figure
To switch your vacuum cleaner on and off, press the On/Off
button in the direction of the arrow.
Vacuuming
You have bought an extremely powerful device. The high-
est suction setting is therefore only recommended for
heavily soiled, short-pile carpets and hard floors.
7
Figure
The required suction power can be selected by adjusting the
suction regulator.
■ Low
suction range:
For vacuuming delicate fabrics, e.g. curtains.
■ Moderate
suction range:
For daily vacuuming of lightly soiled floors.
■ High
suction range:
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.
■ Turbo range:
For vacuuming stubborn dirt and very heavily soiled sur-
faces.
8
Figure
Adjusting the floor tool:
a) For vacuuming rugs and carpets
b) For vacuuming hard floors
=>
=>
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis