Fracarro SIG7100 Betriebsanleitung Seite 24

Enable/Disable
Transport Stream
on the Backpanel
OUTPUT
TS OUTPUT
Set the parameters
RCA OUTPUT
of RCA output
Confirm the settings by pressing the
There is the OUTPUT menu on detail:
TS OUTPUT – To enable or disable the output Transport Stream on the back-panel.
RCA OUTPUT – To set the output RCA parameters.
VIDEO FORMAT – To select the output video format among Letter box, Pan and Scan, Combined or
Adapted 16/9.
AUDIO TYPE OUT – To adjust the output audio type among MONO, MONO LANG 1, MONO LANG  or
STEREO.
AUDIO LEVEL – To adjust the output audio level with values from 0 to 10 (step 1).
STANDARD – To adjust the output standard video from PAL, PAL-N, SECAM-L,NTSC-M or PAL-M.
5.3.6 OUTPUT MENU
ENABLE
Video format
settings
VIDEO FORMAT
Audio Output
AUDIO TYPE OUT
adjustment
Audio Level
AUDIO LEVEL
adjustment
Video standard
STANDARD
adjustment
pressing the S key after the modules programmation.
ENABLE
DISABLE
DISABLE
Letter Box Adapted – 16/9
MONO AUTO
0 10
PAL
PAL-M
key; save the settings by
4
Letter Box
Pan and Scan
Combined
Adapted – 16/9
MONO
MONO LANG 1
MONO LANG 2
STEREO
0, 1, ..., 10
PAL
PAL-N
SECAM-L
NTSC-M
PAL-M