Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning The Milk System - Siemens TI 905 Gebrauchsanleitung

Kaffeevollautomat
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

en Daily care and cleaning
Cleaning the drip tray and the coffee
grounds container
~ Fig. %
The drip tray and coffee grounds
Note:
container should be emptied and
cleaned every day in order to prevent
deposits.
Pull the drip tray with the coffee
1.
grounds container forwards and out.
Remove the drip plate.
2.
Empty and clean the drip tray and
3.
coffee grounds container.
Wipe out the interior of the appliance
4.
(intake trays).
Cleaning the milk container
~ Fig. '
For reasons of hygiene, the milk
Note:
container should be cleaned regularly
Dismantle the milk container into its
1.
individual parts.
Clean all parts of the milk container
2.
or put them in the dishwasher.

Cleaning the milk system

The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
:
Warning
Risk of burns!
The outlet system becomes very hot.
After use, always let the outlet system
cool down before you touch it.
~ Fig. #, ~ Fig. &
Manually clean the milk system on a
weekly basis, or more frequently if
required. For particularly thorough
cleaning, the milk system can be
additionally rinsed with water. ~ "Rinse
milk system" on page 63
60
Remove the milk system:
Remove the milk container from the
1.
appliance.
Slide the outlet system to the bottom
2.
position.
Press the unlocking mechanism at
3.
the top right.
Fold the cover down towards the
4.
front and remove.
Remove the milk system and
5.
dismantle into individual parts.
Clean the individual parts with
6.
detergent solution and a soft cloth.
Rinse all parts with clean water and
7.
leave to dry.
All parts of the milk system can
Note:
be cleaned in the dishwasher.
Detergent residues in the milk system
must be thoroughly removed following
the rinsing process.
Inserting the milk system:
Assemble the individual parts of the
1.
milk system.
Insert the milk system into the cover.
2.
Position the cover at the bottom and
3.
pivot upwards until it engages.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ti 907Ti 909Ti 905 serieTi 907 serieTi 909 serieTi905501 ... Alle anzeigen

Inhaltsverzeichnis