Ca-Mi T-Flash Bedienungsanleitung Seite 18

GB
Functions
Room
Temperature
Forehead
Temperature
Scan Mode
Fever Alarm
MUTE
function
Memory
Locations
Suitable ambient temperature is important
for the baby and patient, the thermometer
always help you recognize the room
temperature.
--> Setting "Real time clock" first to enable
this function. After power off, room
temperature will
be shown on the screen with
--> Please see the "Use of the thermometer"
section to learn how to get the correct room
temperature.
The thermometer has been designed for
practical use. It's not meant to replace a visit
to the doctor. Please also remember to
compare the measurement result to your
regular body temperature.
Please consult with doctor if you have health
concerns.
--> Please see the "Use of the thermometer"
section to learn how to measure the body
temperature.
The Scan mode shows the actual, unadjusted
surface temperatures, which is different from
the body temperature. It can help you to
monitor if the object temperature is suitable
for the baby or patient, for example the baby's
milk.
--> Please see the "Use of the thermometer"
section to learn how to measure the object
temperature.
If thermometer detects a body temperature >
37.5°C, there will be a long beep sound followed
by three short beep sound to warn the user for
potential fever.
The device setting with buzzer is on, you can
set buzzer on/off under Mute mode.
When power on, press and hold the "ON/MEM"
button for 3 seconds. The icon will flash on the
LCD screen and then release the "ON/MEM"
button to set MUTE. Thus you will not hear
beep sounds. You can also use the same process
to turn off the Mute function.
Note: If keep pressing "ON/MEN" button for
5 seconds after icon flashing, the device will
be power off WITHOUT setting MUTE.
There are total 25 sets memories for body
measurement. Each memory also records the
measurement date/time/mode icon and site location.
--> When in power on, Press the "ON/MEM"
button to see the temperature stored with
icon.
icon.
18