Quax BABY ROCKER Anleitung Seite 17

Step 4.2 : Use the parts from step 4.1, both sleds LS, four bolts B and the allen key C
Place the sleds (LS) on the provided holes in the legs. Push the bolts (B) in the holes in the sleds and tighten in the legs.
Now tighten the bolts (A) from step 4.1 to 100%. Turn the rocking chair on its base.
Step 4.3 : Using the safety harness
Put the crotch strap between your childs legs and insert the clipses of the waistbelts into the central buckle on the crotch
strap. When you hear the clicks the straps are fastened. Adjust the length of the belts according to the size of your child
by using the sliding buckles on the straps. Retain 2 cm clearance between belt and child.
To open the harness : press both hooks on the clips inserted in the central buckle and pull out the straps.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
BABY ROCKER
Step 4.4 : Using the cushion
To remove the cushion turn the rocking chair and pull down the loops of the
cushion. Pull out the pins of the loops and carefully remove the cushion. Re-
verse the procedure to replace the cushion.
T 0032 9 380 80 95
76 16 J11xx
17
www.quax.eu - E E info@quax.eu