Dehn HVI long-Leitung Montageanleitung Seite 28

HVI long Conductors are suitable for outdoor use and can be installed downstream of the sea-
®
Â
ling end e.g. on roofs, in walls, under plaster, in concrete or on facades/facade constructions. Only
HVI long Conductors with an additional grey sheat may be installed in the soil, e.g. to connect
®
the down conductor installed on the building to the ring earth electrode over a length of max. 2 m.
HVI long Conductors must not be used to locally increase the potential gradient area in the soil
®
(risk of step voltage).
Soiled HVI long Conductors can be cleaned with a cloth soaked with a special cleaning agent (Part
®
Â
No. 297 199). To be able to comply with dangerous goods regulations, this product is only transpor-
ted within Germany and Austria. ISOPROPYL ALCOHOL (99.1 to 99.9 %) (CSA No. 67-63.0) can be
used as an alternative!
Due to the special design of their outer sheath, HVI
Â
end range.
HVI long Conductors with grey sheath may be coated if the following conditions are fullfilled:
®
Â
Lacquers and paints have to be PVC-compatible, may be water-soluble and may contain solvents.
Note:
Solvents in paints and lacquers quickly evaporate if a thin coat is applied and do not damage pla-
stics.
When using HVI
Â
observed (see installation instructions Publication No. 1501).
The function of HVI
Â
they do not have a magnetic shielding effect. Induction effects in secondary conductors/loops must
be observed. If required, surge protection measures have to be taken.
For application-specific questions, please contact the relevant sales team or the DEHN representati-
Â
ve in your country.
4
long Conductors in hazardous locations, special installation conditions must be
®
long Conductors is to maintain the separation distance. Due to their design,
®
Conductors must not be painted in the sealing
®