Check Battery Status - Raikko EVOLUTION Bedienungsanleitung

English
The battery life of the speaker system will be shorter if energy is
being supplied to external devices.
CHARGInG tHe RAIKKO
Connect the RAIKKO
PC or a laptop using the charging cable supplied in order to charge
the device. Connect one end to the charging port (Micro-USB) (5)
on the RAIKKO
corresponding USB port. You can also charge the device on a power
socket by connecting it to the USB network adapter supplied. Green
LEDs on the battery display (7) show that the device is charging by
moving from left to right. The current charge status is shown by the
number of solidly lit LEDs. If all of the LEDs are continuously lit, this
shows that the battery is fully charged.
This may take up to 12 hours, depending on the status of the RAIKKO
EVOLUTION Bluetooth

CHeCK BAtteRY stAtUs

To check the battery status, press the power switch (1) on the
RAIKKO EVOLUTION Bluetooth
®
already switched on. The remaining charge is shown by the number
of lights that are still on.
Reset
Just press the reset button (11) for 3 seconds using a pointed
object (e.g. paper clip) if you wish to restore the device to its factory
settings or if errors occur with the device.
eVOLUtIOn BLUetOOtH
®
EVOLUTION Bluetooth
®
EVOLUTION Bluetooth
®
battery and the source used to charge it.
®
to a USB port on a
®
and the other end to the
®
once briefly when the device is
®
EVOLUTION Bluetooth
®
®
®
17