Raikko EVOLUTION Bedienungsanleitung Seite 15

English
device) and use this to pair with the RAIKKO
Bluetooth . If you are asked for your PIN, enter '0000'. A solid
®
blue light on the status LED shows that there is a connection. The
terminal/audio playback device will be recognised when it connects
again in the future. For additional information, please refer to the
instructions provided with your terminal/audio playback device.
sWItCHInG OFF/DIsCOnneCtInG
To turn the RAIKKO
switch for about 3 seconds.
OPeRAtIOn WItH An estABLIsHeD BLUetOOtH
If a connection has been established, you have the option
to playback music or other audio streams via the RAIKKO
EVOLUTION Bluetooth
volume controller on your terminal/audio playback device or on the
RAIKKO EVOLUTION Bluetooth
®
until you reach the desired volume. You will hear a beep if you have
reached the maximum volume. The maximum volume is set after the
RAIKKO EVOLUTION Bluetooth
®
You can also control the playback functions remotely from the
RAIKKO EVOLUTION Bluetooth
®
(terminal/audio playback device supports this function. For
additional information, please refer to the instructions provided
with your terminal/audio playback device. To play or stop, press the
'Bluetooth button' (4) once briefly. To skip to the next track, press
®
the '+ button' (3) once briefly. To play the current track again, press
the '– button' (2) once briefly. Pressing the button twice or more
takes you back to the previous track.
EVOLUTION Bluetooth
®
. You can either adjust the volume via the
®
®
®
®
EVOLUTION
®
off, press the power
®
. Press the '+' (3) and '–' buttons
has been switched on.
, provided that the paired device
EVOLUTION Bluetooth
COnneCtIOn
®
®
®
15