Raikko EVOLUTION Bedienungsanleitung Seite 16

English
You cannot pair more than one terminal/playback device at the
same time. Only one terminal/audio playback device can access the
RAIKKO EVOLUTION Bluetooth
®
Bluetooth connection, you can also make phone calls via the
®
RAIKKO EVOLUTION Bluetooth
®
(terminal/audio playback device) supports this function.
AUDIO OUtPUt VIA CABLe COnneCtIOn
In order to playback an audio signal via a cable connection,
plug the line IN cable supplied into the corresponding port (8).
Connect the other end to the headphone jack on your smartphone,
mobile, MP3/4 player or to the audio output on a computer/laptop
(terminal/audioplayback equipment). The Bluetooth
automatically interrupted when a cable is inserted. This is shown by
a red light on the status LED. Playback via Bluetooth
(if available) when the cable is removed. The LED display is blue again.
sUPPLYInG POWeR tO eXteRnAL DeVICes
The RAIKKO
®
port (6) which can be used to supply power to electronic devices
that can be charged via USB (smartphones, mobiles, MP3/4
players, navigation devices). Use the appropriate cable/connector
combinations from the adapter kit supplied to connect the devices
you wish to charge to the RAIKKO
as a power supply, the RAIKKO
be switched on.
Caution!
Only use devices which conform to the USB standard (5 V) for this
connection. Devices with different technical specifications may be
damaged if connected.
16
EVOLUTION Bluetooth
at a time. If there is an existing
®
, provided that the paired device
®
is equipped with a USB
®
EVOLUTION Bluetooth
®
EVOLUTION Bluetooth
®
EVOLUTION Bluetooth
®
connection is
is restarted
®
. To act
®
needs to
®
®