Opening The Casing - Fujitsu FUTRO S450 Bedienungsanleitung

Opening the casing

Casing, Device,
Note that some components on the mainboard may be very hot if the device was in
use shortly before the casing was removed.
These components can be marked with the following symbol.
► Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
► Remove any connected wires which are in the way.
2
1
► Loosen the screws at the rear (1).
► Push the casing cover forward (2).
► Lift off the casing cover (3).
A26361-K522-Z226-1-7419, edition 2
"Important notes", Page
3
1
System expansions
2.
2
English - 17